These LED tube lights are documented as ET8-3150H-18 lamps with published 18 W, 2300 lm and fixed 5000 K ratings per lamp. Hybrid Type A operation needs an exact compatible ballast, while Type B installation requires the matching supplied ballast-bypass instructions.
Key details
- Published 18 W applies to one documented lamp, not the pack total.
- Fixed 5000 K applies to the documented model scope.
- Hybrid Type A with an exact compatible ballast, or Type B with supplied ballast-bypass instructions.
- The original image shows close-up of a pale tube and white two-pin end cap.
Specifications
Values below apply only to the named lamp or base fixture and selected option. Pack totals and unverified accessory assemblies are not inferred.
| Applicable option |
ET8-3150H-18; One ET8-3150H-18 lamp; fixed5000K. Hybrid Type A requires exact compatible ballast; Type B requires supplied ballast-bypass instructions. Published18W2300lm are lamp ratings, not measured whole-system values for every ballast. Non-dimmable. Historical catalogue ratings; supplied revision and UK conformity remain unverified. |
| Published voltage minimum (V) |
100 V |
| Published voltage maximum (V) |
277 V |
| Supply type |
AC |
| Published per-unit power (W) |
18 W |
| Published light output (lm) |
2300 lm |
| Documented lamp base |
G13 |
| Fixed colour temperature (K) |
5000 K |
| Beam angle (degrees) |
270 degrees |
| Documented component model |
ET8-3150H-18 |
Package contents
The complete delivered contents are not confirmed. Obtain the actual lamp quantity and included mounting,holder,lead and accessory list for the selected option before ordering.
Questions and answers
Will it work in a UK installation?
Published voltage or lamp shape alone does not establish UK suitability. The supplied revision,50Hz operation,connection and conformity require confirmation.
Can I swap it for any similar tube or fitting?
Hybrid Type A with an exact compatible ballast, or Type B with supplied ballast-bypass instructions. Match the exact installation instructions and existing equipment; a shared shape or base alone is not compatibility.
What is included?
The complete packing list and delivered quantity are unconfirmed. Shop pack names and photographs do not establish included holders,fixings,leads,sensors or backup parts.
Can I add a sensor,emergency unit or dimmer?
Accessory identity and assembled performance require separate confirmation. Do not transfer base-fixture values or infer a control protocol from a commercial option name.
Before ordering
Published lamp ratings are not measured whole-system results for every ballast. Do not transfer ET8-4150H-18 or other catalogue rows. Historical ballast lists are conditional; exact end wiring, frequency, supplied revision and UK suitability remain unconfirmed. Confirm the exact supplied label,installation instructions,mechanical fit and regional requirements. No unrestricted substitute or UK conformity is established.
Browse Indoor LED Lights
Related lighting
Browse other designs; these links do not establish compatible parts or direct replacements.