These LED tube lights have documented 17 W, 5000 K and G13 ratings per selected XSY-T8-4G17W-50K lamp, independent of pack size. The documented installation is double-ended ballast bypass; choose the frosted or clear shop option and confirm the delivered pack and lamp revision.
Key details
- Published 17 W applies to one documented lamp, not the pack total.
- Fixed 5000 K applies to the documented model scope.
- Type B, double-ended ballast bypass only; not ballast-retained or single-ended wiring.
- The original image shows pale tubes arranged below a large close-up of a two-pin end cap.
Specifications
Values below apply only to the named lamp or base fixture and selected option. Pack totals and unverified accessory assemblies are not inferred.
| Applicable option |
XSY-T8-4G17W-50K-FT-20; Per individual exact selected 17 W, 5000 K G13 tube, independent of pack quantity. Non-dimmable, double-ended ballast-bypass only. No ballast-retained or single-ended wiring compatibility. Flux conflict unresolved; UK conformity and frequency unverified. |
| Published voltage minimum (V) |
120 V |
| Published voltage maximum (V) |
277 V |
| Published per-unit power (W) |
17 W |
| Documented lamp base |
G13 |
| Fixed colour temperature (K) |
5000 K |
| Beam angle (degrees) |
120 degrees |
| Documented component model |
XSY-T8-4G17W-50K-FT-20 |
| Applicable option |
XSY-T8-4G17W-50K-CR-20; Per individual exact selected 17 W, 5000 K G13 tube, independent of pack quantity. Non-dimmable, double-ended ballast-bypass only. No ballast-retained or single-ended wiring compatibility. Flux conflict unresolved; UK conformity and frequency unverified. |
| Published voltage minimum (V) |
120 V |
| Published voltage maximum (V) |
277 V |
| Published per-unit power (W) |
17 W |
| Documented lamp base |
G13 |
| Fixed colour temperature (K) |
5000 K |
| Beam angle (degrees) |
120 degrees |
| Documented component model |
XSY-T8-4G17W-50K-CR-20 |
Package contents
The complete delivered contents are not confirmed. Obtain the actual lamp quantity and included mounting,holder,lead and accessory list for the selected option before ordering.
Questions and answers
Will it work in a UK installation?
Published voltage or lamp shape alone does not establish UK suitability. The supplied revision,50Hz operation,connection and conformity require confirmation.
Can I swap it for any similar tube or fitting?
Type B, double-ended ballast bypass only; not ballast-retained or single-ended wiring. Match the exact installation instructions and existing equipment; a shared shape or base alone is not compatibility.
What is included?
The complete packing list and delivered quantity are unconfirmed. Shop pack names and photographs do not establish included holders,fixings,leads,sensors or backup parts.
Can I add a sensor,emergency unit or dimmer?
Accessory identity and assembled performance require separate confirmation. Do not transfer base-fixture values or infer a control protocol from a commercial option name.
Before ordering
The FT/FR frosted naming differs between exact option records and the PDF. Exact model pages bind the selected shop SKUs; clear-lens values are not taken from a frosted-only PDF. Published light-output values of 2200 and 2210 lm conflict and is omitted. Confirm the exact supplied label,installation instructions,mechanical fit and regional requirements. No unrestricted substitute or UK conformity is established.
Browse Indoor LED Lights
Related lighting
Browse other designs; these links do not establish compatible parts or direct replacements.