These LED tube lights are documented as F32T8/840/LED/16W/AC lamps with 16 W, 2200 lm and 4000 K ratings per lamp. The manufacturer requires ballast bypass and non-shunted G13 holders; check the exact end-wiring instructions before selecting an existing fitting.
Key details
- Published 16 W applies to one documented lamp, not the pack total.
- Fixed 4000 K applies to the documented model scope.
- Ballast bypass with non-shunted G13 holders; exact supplied end-wiring diagram must be checked.
- The original image shows three cropped pale tubes with light two-pin end caps and printed brand marks.
Specifications
Values below apply only to the named lamp or base fixture and selected option. Pack totals and unverified accessory assemblies are not inferred.
| Applicable option |
F32T8/840/LED/16W/AC; Per 16 W 4000 K lamp, not a pack total. Requires ballast bypass and non-shunted G13 holders; confirm exact wiring and supplied revision. UK conformity and frequency unverified. |
| Published voltage minimum (V) |
120 V |
| Published voltage maximum (V) |
277 V |
| Published per-unit power (W) |
16 W |
| Documented lamp base |
G13 |
| Published light output (lm) |
2200 lm |
| Fixed colour temperature (K) |
4000 K |
| Beam angle (degrees) |
240 degrees |
| Documented component model |
F32T8/840/LED/16W/AC |
Package contents
The complete delivered contents are not confirmed. Obtain the actual lamp quantity and included mounting,holder,lead and accessory list for the selected option before ordering.
Questions and answers
Will it work in a UK installation?
Published voltage or lamp shape alone does not establish UK suitability. The supplied revision,50Hz operation,connection and conformity require confirmation.
Can I swap it for any similar tube or fitting?
Ballast bypass with non-shunted G13 holders; exact supplied end-wiring diagram must be checked. Match the exact installation instructions and existing equipment; a shared shape or base alone is not compatibility.
What is included?
The complete packing list and delivered quantity are unconfirmed. Shop pack names and photographs do not establish included holders,fixings,leads,sensors or backup parts.
Can I add a sensor,emergency unit or dimmer?
Accessory identity and assembled performance require separate confirmation. Do not transfer base-fixture values or infer a control protocol from a commercial option name.
Before ordering
Do not assume double-ended interchangeability from tube shape or G13 base. A manufacturer shipping carton size does not establish the quantity supplied in this shop offer. Exact end wiring and UK installation remain to be checked. Confirm the exact supplied label,installation instructions,mechanical fit and regional requirements. No unrestricted substitute or UK conformity is established.
Browse Indoor LED Lights
Related lighting
Browse other designs; these links do not establish compatible parts or direct replacements.