These LED tube lights are documented as FB32T8/840/LED/12W U-bend lamps with 12 W, 1800 lm and fixed 4000 K lamp ratings. The 2G13 lamp requires a compatible electronic T8 ballast; confirm the exact ballast, holder geometry and fixture before fitting.
Key details
- Published 12 W applies to one documented lamp, not the pack total.
- Fixed 4000 K applies to the documented model scope.
- Type A, compatible electronic T8 ballast required; no direct-mains connection or universal ballast match.
- The original image shows U-shaped pale lamp with two straight arms, a joined curved end and projecting pins at the open ends.
Specifications
Values below apply only to the named lamp or base fixture and selected option. Pack totals and unverified accessory assemblies are not inferred.
| Applicable option |
FB32T8/840/LED/12W; Per lamp when operated with a compatible electronic ballast. Confirm the exact ballast and fixture before fitting; direct mains connection is not supported. Published lamp power is not a total system-power specification. |
| Published lamp power (W) |
12 W |
| Published light output (lm) |
1800 lm |
| Fixed colour temperature (K) |
4000 K |
| Documented lamp base |
2G13 |
| Documented component model |
FB32T8/840/LED/12W |
Package contents
The complete delivered contents are not confirmed. Obtain the actual lamp quantity and included mounting,holder,lead and accessory list for the selected option before ordering.
Questions and answers
Will it work in a UK installation?
Published voltage or lamp shape alone does not establish UK suitability. The supplied revision,50Hz operation,connection and conformity require confirmation.
Can I swap it for any similar tube or fitting?
Type A, compatible electronic T8 ballast required; no direct-mains connection or universal ballast match. Match the exact installation instructions and existing equipment; a shared shape or base alone is not compatibility.
What is included?
The complete packing list and delivered quantity are unconfirmed. Shop pack names and photographs do not establish included holders,fixings,leads,sensors or backup parts.
Before ordering
The 2G13 base does not establish a universal G13 fit. Nominal format and pin-spacing drawing limits are not an unqualified physical length. No T12 blanket replacement, direct mains rating, exact ballast model or UK suitability is established. Confirm the exact supplied label,installation instructions,mechanical fit and regional requirements. No unrestricted substitute or UK conformity is established.
Browse Lighting Controls and Enhancements
Related lighting
Browse other designs; these links do not establish compatible parts or direct replacements.